Home Products

Superior Pressure Feed Chlorinators
(Pressure Feed Chlorinators are only sold internationally. Not available in the US.)

Standard Chlorinators | Auto Switchover Chlorinators
Ammoniators | Sulfonators | Auto-Valve | Safe-T-Chlor


CLP-1
SUPERIOR Gas Chlorinator Series CLP-1
Direct Cylinder Mounted - Pressure Feed Type

- designed specifically for use where there is no electric power avaolable to operate a booster pump, or no pressurized water supply offering a sufficient pressure differential for a vacuum operated, solution feed chlorinator. The SUPEROR Model CLP-1 clamps directly onto the chlorine cylinder valve with a positive yoke-type connection and is operated by the chlorine cylinder gas pressure to feed chlorine gas directly into water. The Model CLP-1 is manually controlled to feed chlorine gas directly into the water at a constant, greatly reduced pressure through plastic tubing which connects the chlorinator to a check valve/diffuser assembly located at the point of chlorine injection.

NOTE: Pressure feed type gas chlorinators are only recommended in installations where there is no electric power or sufficient water pressure differential available which would enable the use of a vacuum solution feed chlorinator. All-vacuum systems are obviously safer than pressure feed systems and should be used whenever possible. (Not sold in the US)

Specifications | Accessories | Sizing Guide | Nozzle Charts | Parts Lists | Warranty | Get a Quote

[Back to Top]











CLPM-1 SUPERIOR Gas Chlorinator Series CLPM-1
Direct Cylinder Mounted - Pressure Feed Type

- designed specifically for use where there is no electric power avaolable to operate a booster pump, or no pressurized water supply offering a sufficient pressure differential for a vacuum operated, solution feed chlorinator. The SUPEROR Model CLPM-1 clamps directly onto the chlorine cylinder valve with a positive yoke-type connection and is operated by the chlorine cylinder gas pressure to feed chlorine gas directly into water. The Model CLPM-1 is manually controlled to feed chlorine gas directly into the water at a constant, greatly reduced pressure through plastic tubing which connects the chlorinator to a check valve/diffuser assembly located at the point of chlorine injection.

NOTE: Pressure feed type gas chlorinators are only recommended in installations where there is no electric power or sufficient water pressure differential available which would enable the use of a vacuum solution feed chlorinator. All-vacuum systems are obviously safer than pressure feed systems and should be used whenever possible. (Not sold in the US)

Specifications | Accessories | Sizing Guide | Nozzle Charts | Parts Lists | Warranty | Get a Quote

[Back to Top]










Superior Products

Contact us !
Phone: (480) 496-5757
Fax: (480) 496-4242
Email: info@industrialservice.com