Pressure Return Systems

A pressure return system is required when the chlorinator effluent must be directed to multiple locations or when the chlorinated stream is to be re-injected to a pressurized tank or line.

Our PowerPro ^® pressure return system removes a sidestream of the main water flow and introduces a portion of it into the chlorinator, where Accu-Tab tablets are eroded at a controlled rate. A centrifugal pump re-injects the resulting chlorinated solution back into the main water line. This sidestream loop is nearly identical to the familiar chlorine gas injection system but without the danger and the hassle.

Each PowerPro pressure return system comes complete with valves, piping, pumps, surge tanks, and the electronic controls necessary to dose the desired amount of chlorine into the main water system. Systems are also available with multiple chlorinators, automatic controllers, and SCADA compatibility.

PowerPro Pressure Return Systems

Model	Chlorine Delivery Range (lbs./hr.)	Tablet Capacity (lbs.)	Unit Dimensions (WxLxH)	Solution Tank Capacity (U.S. gallons)	Unit Inlet/Outlet Size
3012*	Up to 0.5	12	27" x 55" x 50"	22	1"
3075*	0.3 - 2	75	27" x 55" x 50"	22	1"
3150*	1 - 12	150	27" x 55" x 52"	28	1½"
3530	4 - 25	300	35" x 65" x 54"	45	1½"
3550*	4 - 25	550	35" x 65" x 74"	45	1½"
30600	10 - 35	600	35" x 65" x 57"	45	1½"
301100	10 - 35	1,100	35" x 65" x 74"	45	1½"
361000	10 - 35	1,000	41" x 71" x 57"	45	1½"
Dual 3012*	Up to 1	24	27" x 55" x 50"	22	1"
Dual 3075*	0.3 - 4	150	35" x 65" x 50"	22	1½"

*Chlorinators are NSF Standard 61 listed.

PowerPro pressure return units can be easily customized to your individual requirements. Available options include the following:

Residual control
Flow proportion control
Compound loop control
Pressure regulator (required for 70 psi or greater)
Field installed spare pump
Installed weight scale
50 Hz power
SCADA compatible
Chlorinator dehumidifier